Он говорит, что не может создать колеса для Onnx, OpenCV-Python, который использует PEP 517 и не может быть установлен н ⇐ Python

[Anonymous]

Я хочу сказать, что я очень новичок во всем этом. И я не знаю много о кодировании. Я только что следовал учебному пособию, и это был проект искусственного интеллекта, который я использовал в течение последних 4 лет. Моя ОС была обжарена, поэтому я должен снова все переустановить. CUDA 10.2. У меня есть Python 3.10 , но эта программа специально требует 3.6
Поэтому я пошел на установку OpenCV для Python 3.6 , как это требовалось для программы. И это дало мне эту ошибку: < /p>

Успешно построенный MoviePy не удалось построить ошибку OpenCV-python: не удалось создать колеса для OpenCV-python, которая использует PEP 517 и не может быть установлен напрямую < /p>
< /blockquote>
Я не может быть установлен.Using cached opencv-python-4.11.0.86.tar.gz (95.2 MB)
Все это инициируется после того, как я даю эту команду:
pip install insightface==0.2.1 onnxruntime moviepy
< /code>
Как мне решить эту проблему? У меня уже есть OpenCV, подушка и Onnxruntime на моей базе. Но только когда я пытаюсь установить что -то внутри новой Env, ни OpenCV, ни Onnxruntime не устанавливают. < /P>
Весь код ошибки: < /p>
Building wheels for collected packages: onnx, opencv-python
Building wheel for onnx (PEP 517) ... error
ERROR: Command errored out with exit status 1:
command: 'C:\Users\BLUE\anaconda3\envs\simswap\python.exe' 'C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py' build_wheel 'C:\Users\BLUE\AppData\Local\Temp\tmpolkx82pr'
cwd: C:\Users\BLUE\AppData\Local\Temp\pip-install-3h79cm_s\onnx_2f9bcd372eba4a8f8175be32a07827f4
Complete output (62 lines):
fatal: not a git repository (or any of the parent directories): .git
running bdist_wheel
running build
running build_py
running create_version
running cmake_build
Using cmake args: ['C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\Scripts\\cmake.exe', '-DPYTHON_INCLUDE_DIR=C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\include', '-DPYTHON_EXECUTABLE=C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\python.exe', '-DBUILD_ONNX_PYTHON=ON', '-DCMAKE_EXPORT_COMPILE_COMMANDS=ON', '-DONNX_NAMESPACE=onnx', '-DPY_EXT_SUFFIX=.cp36-win_amd64.pyd', '-DCMAKE_BUILD_TYPE=Release', '-DPY_VERSION=3.6', '-A', 'x64', '-T', 'host=x64', '-DONNX_ML=1', 'C:\\Users\\BLUE\\AppData\\Local\\Temp\\pip-install-3h79cm_s\\onnx_2f9bcd372eba4a8f8175be32a07827f4']
Traceback (most recent call last):
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\runpy.py", line 193, in _run_module_as_main
"__main__", mod_spec)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\runpy.py", line 85, in _run_code
exec(code, run_globals)
File "C:\Users\BLUE\anaconda3\envs\simswap\Scripts\cmake.exe\__main__.py", line 4, in
ModuleNotFoundError: No module named 'cmake'
Traceback (most recent call last):
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 349, in
main()
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 331, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 249, in build_wheel
metadata_directory)
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\setuptools\build_meta.py", line 231, in build_wheel
wheel_directory, config_settings)
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\setuptools\build_meta.py", line 215, in _build_with_temp_dir
self.run_setup()
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\setuptools\build_meta.py", line 268, in run_setup
self).run_setup(setup_script=setup_script)
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\setuptools\build_meta.py", line 158, in run_setup
exec(compile(code, __file__, 'exec'), locals())
File "setup.py", line 365, in
"backend-test-tools = onnx.backend.test.cmd_tools:main",
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\setuptools\__init__.py", line 153, in setup
return distutils.core.setup(**attrs)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\core.py", line 148, in setup
dist.run_commands()
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\dist.py", line 955, in run_commands
self.run_command(cmd)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\dist.py", line 974, in run_command
cmd_obj.run()
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-rbt8m9in\overlay\Lib\site-packages\wheel\bdist_wheel.py", line 299, in run
self.run_command('build')
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\dist.py", line 974, in run_command
cmd_obj.run()
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\command\build.py", line 135, in run
self.run_command(cmd_name)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\dist.py", line 974, in run_command
cmd_obj.run()
File "setup.py", line 236, in run
self.run_command("cmake_build")
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\distutils\dist.py", line 974, in run_command
cmd_obj.run()
File "setup.py", line 222, in run
subprocess.check_call(cmake_args)
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\subprocess.py", line 311, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\Scripts\\cmake.exe', '-DPYTHON_INCLUDE_DIR=C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\include', '-DPYTHON_EXECUTABLE=C:\\Users\\BLUE\\anaconda3\\envs\\simswap\\python.exe', '-DBUILD_ONNX_PYTHON=ON', '-DCMAKE_EXPORT_COMPILE_COMMANDS=ON', '-DONNX_NAMESPACE=onnx', '-DPY_EXT_SUFFIX=.cp36-win_amd64.pyd', '-DCMAKE_BUILD_TYPE=Release', '-DPY_VERSION=3.6', '-A', 'x64', '-T', 'host=x64', '-DONNX_ML=1', 'C:\\Users\\BLUE\\AppData\\Local\\Temp\\pip-install-3h79cm_s\\onnx_2f9bcd372eba4a8f8175be32a07827f4']' returned non-zero exit status 1.
----------------------------------------
ERROR: Failed building wheel for onnx
Building wheel for opencv-python (PEP 517) ... -
Copying files from CMake output
creating directory _skbuild\win-amd64-3.6\cmake-install\cv2
copying _skbuild\win-amd64-3.6\cmake-install\bin\opencv_videoio_ffmpeg4110_64.dll -> _skbuild\win-amd64-3.6\cmake-install\cv2\opencv_videoio_ffmpeg4110_64.dll
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\python-3\cv2.pyd -> _skbuild\win-amd64-3.6\cmake-install\cv2\cv2.pyd
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\__init__.py -> _skbuild\win-amd64-3.6\cmake-install\cv2\__init__.py
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\load_config_py2.py -> _skbuild\win-amd64-3.6\cmake-install\cv2\load_config_py2.py
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\load_config_py3.py -> _skbuild\win-amd64-3.6\cmake-install\cv2\load_config_py3.py
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\config.py -> _skbuild\win-amd64-3.6\cmake-install\cv2\config.py
copying _skbuild\win-amd64-3.6\cmake-install\python\cv2\config-3.py -> _skbuild\win-amd64-3.6\cmake-install\cv2\config-3.py
Traceback (most recent call last):
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 349, in
main()
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 331, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "C:\Users\BLUE\anaconda3\envs\simswap\lib\site-packages\pip\_vendor\pep517\in_process\_in_process.py", line 249, in build_wheel
metadata_directory)
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-4r588ro1\overlay\Lib\site-packages\setuptools\build_meta.py", line 231, in build_wheel
wheel_directory, config_settings)
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-4r588ro1\overlay\Lib\site-packages\setuptools\build_meta.py", line 215, in _build_with_temp_dir
self.run_setup()
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-4r588ro1\overlay\Lib\site-packages\setuptools\build_meta.py", line 158, in run_setup
exec(compile(code, __file__, 'exec'), locals())
File "setup.py", line 541, in
main()
File "setup.py", line 314, in main
cmake_source_dir=cmake_source_dir,
File "C:\Users\BLUE\AppData\Local\Temp\pip-build-env-4r588ro1\overlay\Lib\site-packages\skbuild\setuptools_wrap.py", line 683, in setup
cmake_install_dir,
File "setup.py", line 454, in _classify_installed_files_override
raise Exception("Not found: '%s'" % relpath_re)
Exception: Not found: 'python/cv2/py.typed'
----------------------------------------
ERROR: Failed building wheel for opencv-python
Failed to build onnx opencv-python
ERROR: Could not build wheels for onnx, opencv-python which use PEP 517 and cannot be installed directly


Подробнее здесь: https://stackoverflow.com/questions/794 ... 17-and-can