Я начинаю работать с эластичным поиском. Я успешно установил эластичный поиск на свой сервер (отличается от сервера приложений). Но когда я пытаюсь вызвать поиск Elatic с моего сервера приложений, он выдает ошибку
# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
# Before you set out to tweak and tune the configuration, make sure you
# understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please see the documentation for further information on configuration options:
#
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: my-application
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-1
#
# Add custom attributes to the node:
#
# node.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
# path.data: /path/to/data
#
# Path to log files:
#
# path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
# bootstrap.memory_lock: true
#
# Make sure that the `ES_HEAP_SIZE` environment variable is set to about half the memory
# available on the system and that the owner of the process is allowed to use this limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
#network.host: 0.0.0.0
#network.bind_host: 0
#
# Set a custom port for HTTP:
#
# http.port: 9200
#
# For more information, see the documentation at:
#
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when new node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
# discovery.zen.ping.unicast.hosts: ["host1", "host2"]
#
# Prevent the "split brain" by configuring the majority of nodes (total number of nodes / 2 + 1):
#
# discovery.zen.minimum_master_nodes: 3
#
# For more information, see the documentation at:
#
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
# gateway.recover_after_nodes: 3
#
# For more information, see the documentation at:
#
#
# ---------------------------------- Various -----------------------------------
#
# Disable starting multiple nodes on a single system:
#
# node.max_local_storage_nodes: 1
#
# Require explicit names when deleting indices:
#
# action.destructive_requires_name: true
Я начинаю работать с эластичным поиском. Я успешно установил эластичный поиск на свой сервер (отличается от сервера приложений). Но когда я пытаюсь вызвать поиск Elatic с моего сервера приложений, он выдает ошибку [code]Fatal error: Uncaught exception 'Elasticsearch\Common\Exceptions\NoNodesAvailableException' with message 'No alive nodes found in your cluster'[/code]
Когда я проверяю статус поиска Elastic, он показывает [b]Активен[/b].
Как я могу вызвать эластичный поиск с моего сервера приложений на мой сервер эластичного поиска.
[code] [/code]
[b]Мои настройки elasticsearch.yml[/b]
[code] # ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please see the documentation for further information on configuration options: # # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: my-application # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: node-1 # # Add custom attributes to the node: # # node.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # # path.data: /path/to/data # # Path to log files: # # path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # # bootstrap.memory_lock: true # # Make sure that the `ES_HEAP_SIZE` environment variable is set to about half the memory # available on the system and that the owner of the process is allowed to use this limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # #network.host: 0.0.0.0 #network.bind_host: 0 # # Set a custom port for HTTP: # # http.port: 9200 # # For more information, see the documentation at: # # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when new node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # # discovery.zen.ping.unicast.hosts: ["host1", "host2"] # # Prevent the "split brain" by configuring the majority of nodes (total number of nodes / 2 + 1): # # discovery.zen.minimum_master_nodes: 3 # # For more information, see the documentation at: # # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # # gateway.recover_after_nodes: 3 # # For more information, see the documentation at: # # # ---------------------------------- Various ----------------------------------- # # Disable starting multiple nodes on a single system: # # node.max_local_storage_nodes: 1 # # Require explicit names when deleting indices: # # action.destructive_requires_name: true [/code]
[b]Настройки Elasticsearch.yml, которые не работают[/b]
[code]network.host: 127.0.0.1[/code]
[code]network.host: 0[/code]
[code]network.host: 0.0.0.0[/code]
[code]network.host: IP_Address[/code]
[code]network.bind_host: 0[/code]
[code]network.bind_host: IP_Address[/code]
[b]Когда я устанавливаю вышеуказанные настройки, elasticsearch показывает статус сбоя.[/b]
[b]ПРИМЕЧАНИЕ. Elastic search устанавливается на сервер, отличный от моего сервера приложений.[/b]
Как настроить Django ALLOW_HOSTS на экземпляре Elastic Beanstalk, чтобы разрешить IP-адрес Elastic Load Balancer?
Справочная информация
Я развернул веб-сайт Django на Elastic Beanstalk. Домен веб-сайта добавляется в ALLOW_HOSTS, поэтому обычные...
Как настроить Django ALLOW_HOSTS на экземпляре Elastic Beanstalk, чтобы разрешить IP-адрес Elastic Load Balancer?
Справочная информация
Я развернул веб-сайт Django на Elastic Beanstalk. Домен веб-сайта добавляется в ALLOW_HOSTS, поэтому обычные...