Ошибка установки pyqt5 под архитектурой aarch64 ⇐ Python

[Anonymous]

Я пытаюсь установить pyqt5 V5.15.2 в дистрибутиве эмуляции qemu aarch64 debian, но не получается со следующей трассировкой:

Код: Выделить всё

root@debian-arm64:~# pip install pyqt5==5.15.2 --config-settings --confirm-license= --verbose
Using pip 23.0.1 from /usr/local/lib/python3.9/dist-packages/pip (python 3.9)
Collecting pyqt5==5.15.2
Using cached PyQt5-5.15.2.tar.gz (3.3 MB)
Running command pip subprocess to install build dependencies
Collecting sip=5.3
Using cached sip-6.7.7-cp37-abi3-linux_aarch64.whl
Collecting PyQt-builder=1.6
Using cached PyQt_builder-1.14.1-py3-none-any.whl (3.7 MB)
Collecting toml
Using cached toml-0.10.2-py2.py3-none-any.whl (16 kB)
Collecting packaging
Using cached packaging-23.0-py3-none-any.whl (42 kB)
Collecting ply
Using cached ply-3.11-py2.py3-none-any.whl (49 kB)
Collecting setuptools
Using cached setuptools-67.5.1-py3-none-any.whl (1.1 MB)
Installing collected packages: ply, toml, setuptools, packaging, sip, PyQt-builder
Successfully installed PyQt-builder-1.14.1 packaging-23.0 ply-3.11 setuptools-67.5.1 sip-6.7.7 toml-0.10.2
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Installing build dependencies ... done
Running command Getting requirements to build wheel
Getting requirements to build wheel ...  done
Running command Preparing metadata (pyproject.toml)
Querying qmake about your Qt installation...
This is the GPL version of PyQt 5.15.2 (licensed under the GNU General Public License) for Python 3.9.2 on linux.
Found the license file 'pyqt-gpl.sip'.
Checking to see if the QtCore bindings can be built...
Checking to see if the QtNetwork bindings can be built...
Checking to see if the QtGui bindings can be built...
Checking to see if the QtWidgets bindings can be built...
Checking to see if the QtQml bindings can be built...
Checking to see if the QAxContainer bindings can be built...
Checking to see if the QtAndroidExtras bindings can be built...
Checking to see if the QtBluetooth bindings can be built...
Checking to see if the QtDBus bindings can be built...
Checking to see if the QtDesigner bindings can be built...
Checking to see if the Enginio bindings can be built...
Checking to see if the QtHelp bindings can be built...
Checking to see if the QtMacExtras bindings can be built...
Checking to see if the QtMultimedia bindings can be built...
Checking to see if the QtMultimediaWidgets bindings can be built...
Checking to see if the QtNetworkAuth bindings can be built...
Checking to see if the QtNfc bindings can be built...
Checking to see if the QtOpenGL bindings can be built...
Checking to see if the QtPositioning bindings can be built...
Checking to see if the QtLocation bindings can be built...
Checking to see if the QtPrintSupport bindings can be built...
Checking to see if the QtQuick bindings can be built...
Checking to see if the QtQuick3D bindings can be built...
Checking to see if the QtQuickWidgets bindings can be built...
Checking to see if the QtRemoteObjects bindings can be built...
Checking to see if the QtSensors bindings can be built...
Checking to see if the QtSerialPort bindings can be built...
Checking to see if the QtSql bindings can be built...
Checking to see if the QtSvg bindings can be built...
Checking to see if the QtTest bindings can be built...
Checking to see if the QtTextToSpeech bindings can be built...
Checking to see if the QtWebChannel bindings can be built...
Checking to see if the QtWebKit bindings can be built...
Checking to see if the QtWebKitWidgets bindings can be built...
Checking to see if the QtWebSockets bindings can be built...
Checking to see if the QtWinExtras bindings can be built...
Checking to see if the QtX11Extras bindings can be built...
Checking to see if the QtXml bindings can be built...
Checking to see if the QtXmlPatterns bindings can be built...
Checking to see if the _QOpenGLFunctions_2_0 bindings can be built...
Checking to see if the _QOpenGLFunctions_2_1 bindings can be built...
Checking to see if the _QOpenGLFunctions_4_1_Core bindings can be built...
Checking to see if the dbus-python support should be built...
The dbus-python package does not seem to be installed.
These bindings will be built: Qt, QtCore, QtNetwork, QtGui, QtWidgets, QtDBus, QtOpenGL, QtPrintSupport, QtSql, QtTest, QtXml, _QOpenGLFunctions_2_0, _QOpenGLFunctions_2_1, _QOpenGLFunctions_4_1_Core, pylupdate, pyrcc.
Generating the Qt bindings...
_in_process.py: /tmp/pip-install-m6oiyjbv/pyqt5_1965ddd1193045bab17bb1f59ff08aa1/sip/QtCore/qprocess.sip: line 99: column 5: 'Q_PID' is undefined
error: subprocess-exited-with-error

× Preparing metadata (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
full command: /usr/bin/python3 /usr/local/lib/python3.9/dist-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py prepare_metadata_for_build_wheel /tmp/tmpo3qo2dlh
cwd: /tmp/pip-install-m6oiyjbv/pyqt5_1965ddd1193045bab17bb1f59ff08aa1
Preparing metadata (pyproject.toml) ... error
error: metadata-generation-failed

× Encountered error while generating package metadata.
╰─> See above for output.

note: This is an issue with the package mentioned above, not pip.
hint: See above for details.

Единственные две вещи, о которых я получаю предупреждения:

• Запуск pip от имени пользователя root приводят к нарушению разрешений и конфликтному поведению с системным менеджером пакетов. Вместо этого рекомендуется использовать виртуальную среду: https://pip.pypa.io/warnings/venv
• Похоже, пакет dbus-python не установлен.

Если говорить о первом, каждая установка пакета его распечатывает: меня это не волнует, это всего лишь эмулируемая тестовая среда.

Говорю Что касается второго, я установил libdbus-1-3 и libdbus-1-dev и запустил оба pip install dbus-python ( который кажется устаревшим модулем) и dbus-next, поэтому я не знаю, чего там еще не хватает.
ПРОБЛЕМА

Очевидно, переменная Q_PID в qprocess.sip не определена

_in_process.py: /tmp/pip-install-m6oiyjbv /pyqt5_1965ddd1193045bab17bb1f59ff08aa1/sip/QtCore/qprocess.sip: строка 99: столбец 5: «Q_PID» не определен

QUESTION
Что я делаю не так? Как мне исправить эту ошибку?
ДОПОЛНИТЕЛЬНАЯ ИНФОРМАЦИЯ

Список установленных пакетов:

Код: Выделить всё

root@debian-arm64:~# pip list
Package                   Version
------------------------- --------------
altgraph                  0.17.3
certifi                   2020.6.20
chardet                   4.0.0
dbus-next                 0.2.3
dbus-python               1.3.2
httplib2                  0.18.1
idna                      2.10
Mako                      1.1.3
Markdown                  3.3.4
MarkupSafe                1.1.1
packaging                 23.0
pip                       23.0.1
ply                       3.11
pycurl                    7.43.0.6
Pygments                  2.7.1
pyinstaller               5.8.0
pyinstaller-hooks-contrib 2023.0
PySimpleSOAP              1.16.2
python-apt                2.2.1
python-debian             0.1.39
python-debianbts          3.1.0
PyYAML                    5.3.1
reportbug                 7.10.3+deb11u1
requests                  2.25.1
setuptools                67.5.1
six                       1.16.0
toml                      0.10.2
urllib3                   1.26.5
wheel                     0.34.2

Среда Python:

Код: Выделить всё

root@debian-arm64:~# python3 --version
Python 3.9.2
root@debian-arm64:~# pip --version
pip 23.0.1 from /usr/local/lib/python3.9/dist-packages/pip (python 3.9)

Характеристики ОС (debian-11.6.0-arm64):

Код: Выделить всё

root@debian-arm64:~# uname -a
Linux debian-arm64 5.10.0-21-arm64 #1 SMP Debian 5.10.162-1 (2023-01-21) aarch64 GNU/Linux

Ребята, вы можете помочь?

Заранее спасибо,

Хеле.


Подробнее здесь: https://stackoverflow.com/questions/756 ... chitecture